Topic: Roll cage headroom for a giant

We have a 6'7" driver and are having trouble getting the clearance over his head. We were thinking about adding two extra bars from the front halo to the rear hoop that hump up to provide the clearance then putting a bbble in the roof like a GT40. Has that been done before? We have an Earnhardt bar that goes from the halo to the dash bar in the center of the windshield. I was going to run one bar just inside the halo on the drivers side and one from above the Earnhardt bar to the main hoop. Hope that makes sense.

Re: Roll cage headroom for a giant

Done before in various ways.  What you describe is probably fine but email Jay and Evil Genius just to be safe.

https://i.kinja-img.com/gawker-media/image/upload/aug2i9qnybo5gnrklbnh.jpg

Re: Roll cage headroom for a giant

Done many times.  If the cage is not already bent...consider going exocage from the start to save the (pun intended) headache.

Re: Roll cage headroom for a giant

Excellent info.  I was looking into something like this myself.