Topic: Pre fabbed weld in cages.

Im thinking about going this route. We have a certified welder on our team so assembly of this should be straight forward. This looks like it checks all the boxes to past tech, right? What are your thoughts? https://www.urotuning.com/Autopower-U-W … /33351.htm

2 (edited by the shaolin 2017-07-16 01:02 AM)

Re: Pre fabbed weld in cages.

That's a lot of money for a cage kit and it doesn't look like it's going to pass tech.

Rollcagecomponents.com all day every day.

You'll need a tubing notcher.  A quality bit in the harbor freight notcher works great.

-Nathan - Team Captain, Priority Fail Racing
1997 Golf GTI VR6 Mid Engine
Class B winner - Joliet 2015
Regional Award winner - Gingerman 2015

Re: Pre fabbed weld in cages.

RCC X2!!!

I got a custom cage to my dimensions, DOM, 3 NASCAR style door bars both sides, angled halo, dash bar, plus some extra bars, and it was just over 700 including the shipping from VA to CT.

We will use them again.



Bill

2017 NJMP #24 Team Super Grover, DNF, MF, WTF.........
2016 Thompson Motor Speedway #36 Sabrina Duncan's Revenge, IOE Trophy, 5th Place 'C' Class 1977 Ford Pinto
2009 Stafford Motor Speedway #16 Team Teflon, 11th Place (overall) 1997 Saturn SL2

Re: Pre fabbed weld in cages.

And a third vote for Roll Cage Components.  they probably do 50+ cages a year for Lemons and I have never paid more than $700 delivered to the nearest Freight depot.  We have gotten two from them and even with an issue with both ( one their issue, one FedEx) it was still such a pleasant experience I will do it again.

Re: Pre fabbed weld in cages.

+4 for RCC.  Jim is great to work with and makes great cages.   I've used 3 from him so far.

As far as your certified welder goes has he built a cage before?  It's not as simple as just putting it together.  There are a lot of specific rules for exactly where bars should go.  Do a fair amount of research before you start cutting.  I highly recommend getting another Lemons team to talk to you about it before making the first cut.  Then have their cell number as issues pop up.  It's a huge help.  Lots of full time welders often make failing cages in Lemons and cutting them out really sucks.

Team Glue Sticks
00 Firebird, 02 X-Type, NX200, 00 Mazda 626 (Sold)
2016 NJMP Heroic Fix, 2017 NJMP Near Heroic Fix except we can't drive