Topic: Roll Cage Builder in Alabama for Barbers Race

Looking for a roll cage builder in Alabama for the Barbers Race. Our cage has to be redone because it was apparently completely wrong. Any recommendations?

Re: Roll Cage Builder in Alabama for Barbers Race

You may have better luck and more response if you post your situation on FaceBook.The forums here do not get as many eyes as a more visible platform.I would suggest a post that kind of spells out what exactly needs to be done,whether it's just a few items or a total 'cut-out and replace"                                                                                                                                                                               

I would try https://www.facebook.com/groups/1222036431151240

Or https://www.facebook.com/groups/812796615592466

Or https://www.facebook.com/groups/citrusracerlounge

Best of luck......

45+x Loser.....You'd think I would learn......
5x I.O.E  Winner   1 Heroic Fix Winner   1 Org Choice Winner
2x  I Got Screwed Winner    2x Class C Winner
(Still a Class B driver in a Class A car)

Re: Roll Cage Builder in Alabama for Barbers Race

See if that 944 in AL (listed here) is real and still for sale.

See if you can rent a prepped car for the event.

What vehicle are you trying to cage? Do you have enough tubing etc. on hand for a complete replacement? Help the community help you - post more information.

Re: Roll Cage Builder in Alabama for Barbers Race

Try Kirk Racing Products in Mt. Olive, AL, just north of Birmingham.

He's done three Lemons cages for us and all three sailed through tech. He is a former Lemons racer and knows their specs.  He stays booked up, but worth a call.

1112 Hodges Drive, Mount Olive, AL 35117

Phone - 205-608-1156

Half Fast Racing      2 New Beetles and a Miata
Class C win, MSR 2023; previously 2x 2nd in C, 3x 3rd in C.
I Got Screwed AND Halloween Meets Gasoline, Sebring 2024
Two Wrongs and a Right, NOLA 2021

Re: Roll Cage Builder in Alabama for Barbers Race

Thank y’all for your response. It will have to be a full cut out and redo for a 97 VW Cabrio.
We used all our metal for this cage so will have to resource so new metal. Not looking like we are going to pull this one off, so looking to South Carolina race in April.

Re: Roll Cage Builder in Alabama for Barbers Race

wfl1889 wrote:

... a 97 VW Cabrio. ...

Sweet! Git 'er done!

Re: Roll Cage Builder in Alabama for Barbers Race

wfl1889 wrote:

Thank y’all for your response. It will have to be a full cut out and redo for a 97 VW Cabrio.
We used all our metal for this cage so will have to resource so new metal. Not looking like we are going to pull this one off, so looking to South Carolina race in April.

Messaged you.

That guy