Re: Corvair Build Thread (Transcontinental Drifters)

Spring is here and that means new projects! "The Enabler", the Corvair Lakewood-based Jagvair clone is going in the shop and to celebrate I had some shirts commissioned by Kirk Myhre and if you want one click the link below. The shirts are awesome!

https://teespring.com/the-enabler-team- … ;sid=front

I still have some bottle openers available, if you want one email me.

In other Jaguar news, teammate Steve and I have started work on the RXJ6, a FC RX-7 that is getting a '97 XJ6 drivetrain. Funny side note: Bought the original Corvair and the '97 XJ6 donor from the same guy. Bought the Corvair, seller moved to Missouri, now bought the XJ6 from him after his kids wrecked it in Oregon. Small world (at least for undesirable cars).

More progress on "Her Majesty's" intake manifold this week as I have received the tubing. Trying to finish the design and start cutting parts next week.

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

227 (edited by CPT_Trans_Continental 2019-03-04 09:04 AM)

Re: Corvair Build Thread (Transcontinental Drifters)

Nice productive Saturday with the engine coming out and the car prepped for its new drivetrain and roll cage. Bring in the 4.0l!

https://drive.google.com/uc?id=1sYUQSDKllXfuOjbP6VxqAC6FdiPiFdkc

https://drive.google.com/uc?id=1__RnJKM71GUORYDOQd-TUbNJ0_EJAX2y

https://drive.google.com/uc?id=18wPLGDTM0xu7OgpnAcuXOEIozF5i2icQ

https://drive.google.com/uc?id=11Ha2KLTpAmjSyisC5zracFyr6NjlDn8u

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

228 (edited by CPT_Trans_Continental 2019-03-04 09:05 AM)

Re: Corvair Build Thread (Transcontinental Drifters)

There are a few bottle openers left, just e-mail me, and don't forget the new "ENABLER" t-shirts are for sale. Be the envy of everyone with not only a Corvair t-shirt, but a Corvair Lakewood wagon t-shirt.

https://drive.google.com/uc?id=1S-1RMsBbQE4KZFiqIgZE4h2bjl9v6UgX

https://drive.google.com/uc?id=1L38g3BKWN3l6IAkDx0D630DW8uMWBu6G https://drive.google.com/uc?id=1npPUJlpcAUgSoJUtV_cvFJDnAvubtL5R

https://teespring.com/the-enabler-team- … ;sid=front

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

229 (edited by CPT_Trans_Continental 2019-04-29 03:27 PM)

Re: Corvair Build Thread (Transcontinental Drifters)

How to weigh you car for $80.

1. Buy four scales ($40)
2. Make a triangle with 4' legs ($30)
3. Make a 6" pad for the scale and a 12" pad for your tire ($10)
4. Buy a $2500 welder to weld it together

https://drive.google.com/uc?id=1AR3jmA_08Ij0v3eRq4vpF9C4_xu-nvXb

I will get some drawings together so you can play at home.

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

Re: Corvair Build Thread (Transcontinental Drifters)

How to build a Jag 4.0 litre race car. Start by cutting a big friggin' hole in your floor.

https://drive.google.com/uc?id=1qhJUemg6Q8izmWhv9F7vz_Y2_Bj4_kJ_

https://drive.google.com/uc?id=1IqZS9uFEujZBEurGpQzAKTSIIPmNllMi

https://drive.google.com/uc?id=15DErwknbEKAAzVThAPTr3QtD5QYV_9Ms

I still need to go up about 5", goodbye wiper motor.

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

Re: Corvair Build Thread (Transcontinental Drifters)

Work begins on THE ENABLER! Side-swiped drivers-side doors replaced and interior is now race prepped. Floor is toast, I just hope the rockers will support welding.

https://drive.google.com/uc?id=1i-KYdrm0t1WSeo05i-jc8ztn_09g_a5R

https://drive.google.com/uc?id=1LCIIf_wzqwWflJE-HFGcqke4iw44Pj7i

https://drive.google.com/uc?id=1OxMGUFIiAB86Vn9q8oZ1DvJcHKbuAkOc

https://drive.google.com/uc?id=1yitbldFQ5AHNjyS1uqRmzER7_ftlYQI4

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook

232 (edited by CPT_Trans_Continental 2019-08-19 06:48 PM)

Re: Corvair Build Thread (Transcontinental Drifters)

So I finished my first Lemons Rally. 3500 miles and four bashed in fenders and it's time to get back to the serious work.
Sit rep:
Previute is almost ready for the race in October, needs a radiator and fire suppression. Should be finishing that this weekend.
Her Majesty needs intake runners machined and complete intake welding. Followed by new interior/ firewall and driveshaft loops. Minor front alignment work with rear upper arms for camber adjustment.
The ENABLER: full custom build. Next step cut the rest of the Corvair suspension and floor out of the car. Then cut more to make room for XJR drivetrain. Then replace with good metal to fill giant holes. Brakes, running, steering, cooling, safety, etc. Might take awhile, but will probably run Her Majesty next year anyway.
Well that's it for now. I will be chronicling the progress here as well as FB and the Gram. Good luck to all my Class C brethren and in the immortal words of Bob Mitchell, "Build a cool race car and shove it up their ass."

'18 PNW-Organizer's Choice '17 PNW-IOE '15 PNW-Judge's Choice '14 PNW-Heroic Fix
Jagvair 2.0 Build   Jagvair YouTube  Jagvair Facebook