Topic: cage and bumper questions

I have a 510 that was raced in Lemons in '09 with a bolt-in Autopower cage. Is this cage(except needing 1 more door bar ) still acceptable?
Intact 510 bumpers are rare so we had welded some black pipe(front and rear) in place of bumpers? Do I need to try to put original bumpers on the car? thanks, John Team WWF

Re: cage and bumper questions

the autopower should be fine, but post pics and you can have a definitive answer.
Iron pipe bumpers are ok for a 510, as long as they dont stick out farther than the factory bumpers. What did you weld the pipe to? factory bumper mount locations, OK. Roll cage, NOT OK

Yee-Haw 2010 "Most Heroic Fix" & "I Got Screwed" -2 trophies for 1 lap, but I took checkered on my lap.
Gator-O-Rama 2012 "Organizers Choice" -2 laps 1 trophy, but i still finished ahead of an E30
Yee-Haw 2013 No trophy -26 laps, I think I see a pattern here
Gator-O-Rama 2014 "Waiting for the Last Minute Call from the Governor Award" -who's counting? John

Re: cage and bumper questions

Thanks for the reply. Not sure how to post pictures. John

Re: cage and bumper questions

host the picture somwhere else then get the url of the picture

My example url would be
http://wartburg.misfittoysracing.com/im … urggrm.JPG

Now put that inside the img tag [img]your url here[/img]

Should look like this
http://wartburg.misfittoysracing.com/images/Wartburggrm.JPG

Pics must be hosted on a website somewhere you cant post them from your computer.

http://wartburg.misfittoysracing.com
OTTER: "I think that this situation absolutely requires a really futile and stupid gesture be done on somebody's part."
BLUTO: "We're just the guys to do it."

Re: cage and bumper questions

http://picasaweb.google.com/john.deplan … ctlink/img http://picasaweb.google.com/john.deplan … ctlink/img
hope this works. john

6 (edited by Hoonatic Racing 2011-01-20 10:43 AM)

Re: cage and bumper questions

jdep wrote:

hope this works. john

You're not quite there with image posting.
can you take some pics of the cage where it ataches to the car, and some wide shots of the general layout of the cage

Yee-Haw 2010 "Most Heroic Fix" & "I Got Screwed" -2 trophies for 1 lap, but I took checkered on my lap.
Gator-O-Rama 2012 "Organizers Choice" -2 laps 1 trophy, but i still finished ahead of an E30
Yee-Haw 2013 No trophy -26 laps, I think I see a pattern here
Gator-O-Rama 2014 "Waiting for the Last Minute Call from the Governor Award" -who's counting? John

Re: cage and bumper questions

Just needs img tags [I M G] [/ I M G]

http://lh6.ggpht.com/_zCN_tVqVKnQ/TThzujifavI/AAAAAAAAAtw/UaaJjJHgajs/rear%20bumper%20%283%29.jpg

http://lh6.ggpht.com/_zCN_tVqVKnQ/TThzyNflxDI/AAAAAAAAAt4/c65VRxmDlE8/cage%20joint%20%283%29.JPG

Ryan Jones
J4 Racing
BAM-Z-NO! Team Holdafone 1987 NA 300zx
Still looking to get into the top 50%.

Re: cage and bumper questions

Umm... are you sure that is an Autopower bar? the weld where the 'spud' connects to the curve doesn't look to be up to their normal standards... and 99% of AP bars are gloss black. That would make me suspicious in general. As in suspicious enough to ask the connector be rotated to make sure it is seamless.
Anyone else?

...and that rust - wow - I'd want more than a bolt in in any case! Floor-bars, door bars, basic Nascar cage!

Re: cage and bumper questions

I'll try to get some more pics tomorrow. john

Re: cage and bumper questions

Team WWF

Team World Wildlife Federation? Oh, joy! I can see panda costumes!

Or is that a team stacked with such famous drivers as Captain Lou Albano, Andre the Giant, Rowdy Roddy Piper, and Hulk Hogan?