• From: Metamora
  • Registered: 2009-07-22
  • Posts: 217

Topic: Seat belt question. Bolt in to clip in?

So the last time we went through tech they didn't like the location of our belts but let us race anyway.  It was bolted in on the rear bar.  We had changed seats the entry location changed. 

So this year we added a new bar to wrap the seat belts around.  Can I use my existing belts with this adapter?

http://www.speedwaymotors.com/Clip-In-C … ,1059.html

I'm trying to picture how these would work.

Check out what we are cooking
http://www.harddriveracing.com
Facebook
http://www.facebook.com/christopher.carey1

harddriveracing.com's Website

  • RobL
  • RobL
  • Lemons Staff Stalker
  • Offline
  • From: Philly area
  • Registered: 2009-04-30
  • Posts: 2,721

Re: Seat belt question. Bolt in to clip in?

Those go through the floor.  Our team loves those, since we take our seat/belts out all the time and takes all of about 5 minutes to get all the belts out.

--Rob Leone Schumacher Taxi Service
We won the IOE at Southern Discomfort.
We got screwed at The Real Hoopties of New Jersey  and we took cars down with us.
We got the curse at Capitol Offense but they wouldn't let us destroy the car.

RobL's Website

  • FJ40Jim
  • FJ40Jim
  • Lemons Staff Stalker
  • Offline
  • From: Lancaster OH
  • Registered: 2009-05-02
  • Posts: 1,657

Re: Seat belt question. Bolt in to clip in?

To install belts to harness bar doesn't require any adapter.

Wrap belts through 3-bar buckle, around cage, back through 3-bar.

Belt set shoulda come w/ a pair of 3-bars.

Jim C.
If God meant for us to race, we'd all have baggy Nomex skin.
08TMS.09NL.10GM, SP, NL.11SP, NL.12SP, VIR, NL.13GM, NJ.14NJ, VIR, WGI.15AB.16GM.17NCM.18GM.19...
  • RobL
  • RobL
  • Lemons Staff Stalker
  • Offline
  • From: Philly area
  • Registered: 2009-04-30
  • Posts: 2,721

Re: Seat belt question. Bolt in to clip in?

And with those - be sure to wire the clip closed.

--Rob Leone Schumacher Taxi Service
We won the IOE at Southern Discomfort.
We got screwed at The Real Hoopties of New Jersey  and we took cars down with us.
We got the curse at Capitol Offense but they wouldn't let us destroy the car.

RobL's Website

  • From: Metamora
  • Registered: 2009-07-22
  • Posts: 217

Re: Seat belt question. Bolt in to clip in?

I guess I need a three bar because my belts only have the bolt in adapter.  New belts?

Check out what we are cooking
http://www.harddriveracing.com
Facebook
http://www.facebook.com/christopher.carey1

harddriveracing.com's Website

  • RobL
  • RobL
  • Lemons Staff Stalker
  • Offline
  • From: Philly area
  • Registered: 2009-04-30
  • Posts: 2,721

Re: Seat belt question. Bolt in to clip in?

Slide bars can be bought independant of the harness.

http://www.saferacer.com/g-force-3-slid … ductid=876

--Rob Leone Schumacher Taxi Service
We won the IOE at Southern Discomfort.
We got screwed at The Real Hoopties of New Jersey  and we took cars down with us.
We got the curse at Capitol Offense but they wouldn't let us destroy the car.

RobL's Website

  • From: Merrick, NY
  • Registered: 2009-05-13
  • Posts: 2,155

Re: Seat belt question. Bolt in to clip in?

RobL wrote:

Those go through the floor.  Our team loves those, since we take our seat/belts out all the time and takes all of about 5 minutes to get all the belts out.

We have that setup as well, 3 of those eyes through the floor then took a bolt in harness set removed the bolt in parts and and installed the clip in hooks.  Passes tech no problem.

Tom Lomino - Proud to be a 23x Lemons Loser, 3x Class B, and 1x IOE Winner!
Craptain, Team Farfrumwinnin - 1995 Volkswagen Golf #14
Click here to "Like" us on Facebook   Click here for our Youtube Videos
Lifetime Achievement (of hopelessness) Award Winners

RogueLeader's Website